Plastic Diaphragm Pump
Max. Flow:
49m³/hr
Max. Head:
80m
Max. Temp:
100°C
Material:
Plastic
ATEX Plastic Diaphragm Pump
Our ATEX Plastic Diaphragm Pump, made of HDPE and PTFE, is produced using conductive plastic which is filled with carbon and can be used in ATEX Zones. This pump has diaphragms in PTFE (with conductive back) or EPDM (conductive). An earth connection is mounted on the pump, for earthing of electrostatic loads.
ATEX Zones:
• CAT 1 (zone 0), flammable material present continuously or for long periods
• CAT 2 (zone 1), flammable material present occasionally in normal operation
• CAT 3 (zone 2), flammable material present in abnormal conditions for short periods
Features & Benefits
Our ATEX Diaphragm Pump features the same solid block design as the other plastic pumps in our range. This ensures that the pump has a reduced likelihood of leaking where other Diaphragm Pumps on the market may struggle, for example, weakened moulded plastic and multiple edges where moulded plastic is joined together to make the product’s shape, to name a few. This is a crucial feature, mainly when pumping a product that requires an ATEX rating, as dangerous or expensive products must not be able to escape into the surrounding atmosphere. When supplied with our clean-face, no-nut diaphragms, our pumps are perfect for handling these types of liquids and significantly reducing the risk of leakages.
Specifications
| Materials | PE & PTFE |
| Max Capacity | 820 l/min |
| Max Pressure | 160m |
| Self Priming | Yes |
| Max Solids Size | 100mm |
| Max Temperature | 70ºC |
| Viscosity | 0-200+ cSt |
